UNIDENTIFIED

M5105 (A4 MINI SUPER IDE)

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  2-pin connector - Drive active LED                      JP1

  40-pin IDE(AT) Interface connector                      JP2

  34-pin control cable connector - floppy drive           JP3

  15-pin game port - internal                             JP8

  10-pin serial port (COM1/2/3) - internal                JP9

  10-pin serial port (COM2/3/4) - internal               JP10

  25-pin parallel port (LPT1/2/3) - external             JP11

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Hard drive enabled                  JP4 & JP5           closed

      Hard drive disabled                 JP4 & JP5            open

  »   Floppy drive enabled                  JP17             pins 1 & 2
                                                              closed

      Floppy drive disabled                 JP17             pins 2 & 3
                                                              closed

                  SERIAL PORT (JP9 & JP10) CONFIGURATION

         JP9              JP10           Jumper JP6         Jumper JP7

  »       COM1            COM2           pins 1 & 2         pins 1 & 2
                                           closed             closed

          COM1            COM4           pins 1 & 2         pins 2 & 3
                                           closed             closed

          COM3            COM4           pins 2 & 3         pins 1 & 2
                                           closed             closed

          COM2            COM3           pins 2 & 3         pins 2 & 3
                                           closed             closed

              PARALLEL PORT (JP11) CONFIGURATION

        JP11             Jumper JP12          Jumper JP13

    LPT2 enabled       pins 1 & 2 closed   pins 1 & 2 closed

    LPT1 enabled       pins 1 & 2 closed   pins 2 & 3 closed

    LPT3 enabled       pins 2 & 3 closed   pins 1 & 2 closed

      Disabled         pins 2 & 3 closed   pins 2 & 3 closed